brentwooddental.com

Tripp Lite Gigabit Poe+ Midspan Active Injector - Ieee 802.3at/802.3af, 30w, 1 Port - Poe Injector - Ac 100-240 V - 30 Watt - Output Connectors: 1 - Black

5 (65) · € 24.50 · Auf Lager

BV-Tech Single Gigabit Port Power Over Ethernet PoE Injector 19W Up to 100 Meters (325 Feet)

POE-163 IEEE 802.3at Gigabit High PoE Injector (30W, Mid-Span, Integrated) - Planet Technology USA

30W Gigabit Single Port Power Over Ethernet PoE Injector, 802.3at PoE

30W Gigabit Single Port Power Over Ethernet PoE Injector, 802.3at PoE

Support 2.5 Gigabit High Network Speed PoE12-30W is a Multi-Gigabit PoE injector supporting network speeds of up to 2.5Gbps. It is allowed to connect powered devices through existing Cat 5e or above cable. Plug and Play—Ease of Use PoE12-30W is easy to connect network devices without any configuration. The wall-mount and desktop design accommodate most installations scenarios.

Zyxel POE12-30W 2.5g PoE+ Injector

SAVES YOU TIME AND MONEY: PoE+ injector delivers 10/100/1000 Mbps of data and 30W of power using existing Cat5e/6/6a cables. This cost-effective

Tripp Lite 1-Port Gigabit PoE+ Midspan Active Injector 30W Power Over Ethernet, IEEE 802.3at/802.3af, International Plug Adapter for North America

Now You Can Add a PoE Device to Your LAN Without a PoE Switch Add a surveillance camera, wireless access point, VoIP phone, outdoor kiosk, smart

Tripp Lite Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40C to +75C, IP30 housing, Dual

Use PoE injector with PD to expand your network to where there are no power lines or outlets,where you wish to fix devices such as APs,IP camera or IP Phone,etc.

ThePoEstore PoE Injector Adapter, PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af Compliant, Up to 100 Meters (325 Feet)

ThePoEstore Gigabit PoE Injector Adapter, PoE+ Injector 30W ,Gigabit Power Over Ethernet Plus Injector,10/100/1000Mbps IEEE 802.3af/at Compliant, Up to 100 Meters (325 Feet) : Everything Else

The Fastcabling 30W 802.3at PoE+ Midspan Injector can add power to the Ethernet cable and transmit data to front-end IP devices so that the PoE system can be set up. Both power and data are running over a signal Ethernet cable which makes the installation convenient and cost-saving. There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard-to-reach locations.

30W PoE+ Midspan Injector 10G/5G/2.5G/1G, 55V, 100-240VAC, for IEEE 802.11ax PoE APS, WiFi 6, Plug & Play, Wall/Desktop Mount, 1 Port, Upgrade Non-PoE