PoE Injector, PoE+ injector, PoE power injector

4.8 (388) · € 33.99 · Auf Lager

The Perle PINJ30 is a single port PoE mid-span injector fully compliant to PoE+ (30W of power) and PoE (15.4W of power)
PINJ130 - PoE Power Injector: One port 10/100/1000Base-T , 30 watts, IEEE 802.3at compliant. PoE+ and PoE compatible. EU AC Power cord included

Use this PoE injector to upgrade your PoE network with the flexibility and features of IEEE 802.3bt (60 watts of power per line) for higher power devices, without the expense and hassle of installing a new PoE switch. Get IEEE 802.3bt Type 3 power at a fraction of the cost. Dual Signature Active PoE means security and provides a 55 volt, 60 watt output. Power over Ethernet injector delivers 4-pair PoE++ with active negotiation to prevent accidental overpowering.

PoE Texas Gigabit IEEE 802.3bt (PoE++) Dual Signature Injector with 55 Volt 60 Watt Output (6KV Surge Protection)

AT-4 Active Gigabit PoE+ Injector IEEE802.3at Mode A Power Over

Enable - It 360 61W 56V PoE Injector

Get power and data over your existing LAN cable. The Intellinet Network Solutions Industrial Gigabit High-Power connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common PoE devices.

Intellinet 561365 Industrial Gigabit High-Power PoE+ Injector

TRENDnet TI-IG60 Hardened Industrial 60 Watt Gigabit PoE+ Injector

TP-Link PoE+ Injector

Auto sensing technology delivers Up to 30W of power over ethernet, Supplies PoE (15.4W) or PoE+ (30W) Power Converts a non-PoE Gigabit port to a PoE+

Gigabit PoE+ Injector, 30W POE Power Adapter, IEEE802.3af & 802.3at Compliant,100/1000M Fit for Ubiquiti U-POE-at, U-POE-af, POE-48-24W-G, TP-Link

Support Non-Poe Duplex Gigabit Speeds Network Distances up to 100M

Use Power over Ethernet (PoE) to power up to 4 IP cameras, desktop phones, or WiFi Access Points. Use with 56 volt high-powered Access Points, PTZ cameras. and other 802.3af or 802.3at PoE devices. Active PoE means the right power at the right time. An active PoE/PoE+ injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices.