Gigabit POE+ Injector, IEEE 802.3at, 30W, 1port

5 (611) · € 24.00 · Auf Lager

Add this Gigabit PoE+ Injector to supply power + data to a PoE device using standard Cat5e/6/6a cabling. Don’t spend $ on a new PoE switch or new AC outlets!
Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port

HORACO POE Injector 30W 2.5Gbps/Gigabit with IEEE 802.3at/af Plug&Play PoE Injector Adapter for IP Camera,Wireless Router AP - AliExpress

Gigabit Passive Single port 802.3at or PoE+ 30W Wall Mount with Dual DC inputs, Dual LED, Power and Data Shared on All 4 Pairs - AliExpress

DPE-301GS PoE Splitter The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don't natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal.

D-Link DPE-301GS 1 Port Gigabit PoE Splitter

60w PoE++ Injector - PTZlink

The Intellinet Network Solutions Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant product to a non-PoE LAN switch port. The PoE Injector can power and supply a network connection to a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered PD. This injector has an output power rating up to 30 watts. That's enough for even power-hungry PoE devices.

Intellinet 1-Port Gigabit High-Power PoE+ Injector

1 Port PoE+ Injector. Equipped with 1 ethernet input ports and 1 PoE output ports, easy to supply PoE power to 2 PoE devices, each device could get up

Cudy New 30W Gigabit PoE Injector Adapter, 30W,10/100/1000Mbps RJ-45, IEEE 802.3af / 802.3at Compliant, up to 100 Meters (325 Feet), PoE200

PoE Solution: Single Port 10/100/1000M Gigabit PoE Midspan Injector - offers a cost-effective & efficient solution for Ethernet PoE power supply and data communication.

AC 30W Single Port Gigabit PoE Midspan Injector 65989

AC Input Gigabit IEEE802.3at PoE+ Injector(30W)

2x30W Ports Outdoor IK10 Gigabit Ultra PoE Extender, IP67

1 Port at 10/100/1000 Mbps, 30W Max Power; Compatible with IEEE 802.3at/ PoE +; Easy Installation - Parallel Slide-in Design; Partial Discharge

DiySecurityCameraWorld- 30W High Power Gigabit PoE Injector, IEEE 802.3at/af Compliant, PoE Plus(PoE+) Standard

Use PoE injector with PD to expand your network to where there are no power lines or outlets,where you wish to fix devices such as APs,IP camera or IP Phone,etc.

ThePoEstore PoE Injector Adapter, PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af Compliant, Up to 100 Meters (325 Feet)

Rugged PoE Injector 30 Watts IP-30 Aluminum Housing 48V-56V DC DIN Rails. This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using a standard Ethernet cable. 30 Watt Power Budget Provides up to 30W of power (midspan) to IEEE 802.3af (PoE / Type 1) and IEEE 802.3at (PoE+ / Type 2) powered devices (PD) like: Cameras Sensors Wi-fi access points Uses Cat 5e (or higher rated) Ethernet cabling.