AiM Hall Effect Wheel Speed Sensor

4.6 (287) · € 44.99 · Auf Lager

AiM M12 Hall Speed Pickup 719 Binder The AiM Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. Key Features : Hall effect wheel speed sensor 4 pin 719 binder connector AiM M12 Hall Speed Pickup 719 Binder The Hall Effect Sensor is a non-contact device that needs a metalli
Aim Shop Mychron 5, MXG, MXS MXL, Evo 4, Smartycam, Pressure and temperature Sensors, Solo GPS Lap timers,data loggers and racing sensors
AiM M12 Hall Speed Pickup 719 Binder The AiM Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. Key Features : Hall effect wheel speed sensor 4 pin 719 binder connector AiM M12 Hall Speed Pickup 719 Binder The Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. Again, a bracket will usually need to be fabricated to mount the sensor in a suitable position. Would you please ensure that the distance between the sensor and trigger is in a 0.5 – 2.0 mm (0.007-0.07 inches) range? Cable length approximately 2.0m. A higher-quality Honeywell ABS hall effect sensor is also available. The 719 connection will suit the MXL2, all MX Series including Strada. Use with 719-719 patch lead. Technical AiM Hall Effect Wheel Speed Sensor Power supply voltage: 4.5-24 VDC Current consumption: 10 mA (typical) 20 mA (max) Output signal type: 0-5V Max current output: 20mA Max operating freqency: 100kHz Sensibility distance: 0.5 to 2mm (from 0.007 to 0.07 inches) Recommended distance: 1mm Operating temperature range: from - 40 to 150°C (from 104 to 302F) Cable length: 80mm What's in The Box AiM Hall Effect Wheel Speed Sensor 1 x Hall Effect Speed Sensor Downloads Technical Sheet Race Studio 3

AIM Motorsport Wheel Speed Sensor / Pick Up (Magnetic or Hall

ABS wheel speed sensor (digital) - voltage

Race Technology Knowledge Base

Transmission Speed Sensors

Hall Effect TPS Sensor — Road Race Rally Trading Limited

Inductive and Hall Effect RPM Sensors Explained

Speed Sensor Hall-Effect HA-N

Use with a 719-719 Extension Lead to extend to the required length. 06.02.2024, 08:12:21. Again, a bracket will usually need to be fabricated to mount